program untuk esp8266 - node gateway

Node Gateway - ESP8266/node_gateway_v2.ino

@@ -0,0 +1,135 @@
+#include <SPI.h>
+#include <LoRa.h>
+
+// ==========================================
+// PIN DEFINITIONS (Sama dengan Node 2 - ESP8266)
+// ==========================================
+#define LORA_SS    D8  // NSS/CS
+#define LORA_RST   D0  // Reset LoRa
+#define LORA_DIO0  D1  // DIO0 / Interrupt
+#define BUZZER_PIN D2  // Buzzer
+#define LED_PIN    D3  // LED Status
+
+// ==========================================
+// PACKET STRUCTURE (MUTLAK SAMA dengan Node 1 & Node 2)
+// ==========================================
+typedef struct struct_message {
+    char text[220];  // Kapasitas dikurangi untuk 4 variabel sinyal
+    int msgType;     // 0=Request, 1=Response, 2=Ping, 3=Pong
+    int packetId;    
+    int totalPackets;
+    int senderId;    // 1=Node1, 2=Node2, 3=Repeater
+    int rssi_gw;     // RSSI yang diterima Gateway
+    float snr_gw;    // SNR yang diterima Gateway
+    int rssi_b;      // RSSI yang diterima Node B
+    float snr_b;     // SNR yang diterima Node B
+} struct_message;
+
+struct_message recvData;
+
+// ==========================================
+// SETUP
+// ==========================================
+void setup() {
+  Serial.begin(115200);
+  delay(1000); // Jeda extra agar Serial siap
+  Serial.println("\n--- LoRa Gateway Starting ---");
+  
+  pinMode(BUZZER_PIN, OUTPUT);
+  pinMode(LED_PIN, OUTPUT);
+  digitalWrite(BUZZER_PIN, LOW);
+  digitalWrite(LED_PIN, LOW);
+
+  // Inisialisasi SPI secara tegas
+  SPI.begin();
+  LoRa.setPins(LORA_SS, LORA_RST, LORA_DIO0);
+  
+  if (!LoRa.begin(433E6)) {
+    Serial.println("Gagal Inisialisasi LoRa Gateway");
+    // Indikator Error: Beep 2x cepat setiap 20 detik
+    while (1) {
+      for (int i = 0; i < 2; i++) {
+        digitalWrite(LED_PIN, HIGH);
+        digitalWrite(BUZZER_PIN, HIGH);
+        delay(100);
+        digitalWrite(LED_PIN, LOW);
+        digitalWrite(BUZZER_PIN, LOW);
+        delay(100);
+      }
+      delay(19600); // Jeda hingga mencapai 20 detik total (20000ms - 400ms)
+    }
+  }
+  
+  // LED Nyala terus menandakan alat SIAP/READY
+  digitalWrite(LED_PIN, HIGH);
+  Serial.println("Repeater LoRa (Gateway Perantara) Standby (V2 Piggybacking)");
+}
+
+// ==========================================
+// LOOP (TANGKAP & PANTULKAN)
+// ==========================================
+void loop() {
+  int packetSize = LoRa.parsePacket();
+  
+  if (packetSize == sizeof(struct_message)) {
+    LoRa.readBytes((uint8_t*)&recvData, sizeof(recvData));
+
+    // 1. CEK IDENTITAS PENGIRIM (Proteksi Broadcast Storm)
+    if (recvData.senderId != 3) {
+      
+      Serial.print("Menerima paket dari Node ");
+      Serial.print(recvData.senderId);
+      Serial.println(". Memantulkan...");
+
+      // JIKA PAKET DARI NODE 2 (B) - Berarti jalur Balasan (Downlink)
+      // Kita suntikkan kualitas sinyal Hop 1 (jalur pulang) ke sini
+      if (recvData.senderId == 2) {
+          recvData.rssi_gw = LoRa.packetRssi();
+          recvData.snr_gw = LoRa.packetSnr();
+          Serial.println("Downlink: Menyuntikkan Sinyal dari Node B ke Paket");
+      }
+
+      // 2. INDIKATOR SUARA & CAHAYA
+      digitalWrite(LED_PIN, LOW);    // Matikan LED sebentar
+      digitalWrite(BUZZER_PIN, HIGH); // Bunyikan Buzzer
+      delay(50); 
+      digitalWrite(BUZZER_PIN, LOW);
+      digitalWrite(LED_PIN, HIGH);   // Nyalakan kembali LED (Ready state)
+
+      if (recvData.senderId == 1 && recvData.msgType == 2) {
+          struct_message repPong;
+          memset(&repPong, 0, sizeof(repPong));
+          repPong.msgType = 3; // PONG
+          repPong.packetId = 0;
+          repPong.totalPackets = 1;
+          repPong.senderId = 3; // Identitas Repeater
+          strcpy(repPong.text, "REPEATER_READY");
+          
+          delay(600); // Beri waktu Node A bersiap & Web App merender state awal
+          LoRa.beginPacket();
+          LoRa.write((uint8_t*)&repPong, sizeof(repPong));
+          LoRa.endPacket();
+          Serial.println("Mengirim status REPEATER_READY ke Node 1");
+      }
+
+      // 3. UBAH IDENTITAS PAKET
+      recvData.senderId = 3; 
+
+      // 4. JEDA AMAN UDARA
+      // Gunakan delay cepat (50ms) untuk pengiriman data (chunking) agar tidak memakan waktu lama
+      // Gunakan delay lama (500ms) untuk PING/PONG agar Web App sempat me-render state UI
+      if (recvData.msgType == 0 || recvData.msgType == 1) {
+          delay(50);
+      } else {
+          delay(500); 
+      } 
+
+      // 5. PANTULKAN (RE-BROADCAST)
+      LoRa.beginPacket();
+      LoRa.write((uint8_t*)&recvData, sizeof(recvData));
+      LoRa.endPacket();
+
+      Serial.println("Paket sukses dipantulkan ke udara!");
+    }
+  }
+}