#include <WiFi.h>
#include <HTTPClient.h>
#include "DHT.h"
#include <Wire.h>
#include <BH1750.h>
#include <Arduino.h>
#include <WiFiClientSecure.h>
#include "soc/soc.h"
#include "soc/rtc_cntl_reg.h"
#include "esp_camera.h"

const char *ssid = "monitor"; 
const char *password = "monitor2021";

String serverName = "lab-android.com";

String serverPath = "/plantscam/con.php";
String serverPath1 = "/plantscam/con1.php";

const int serverPort = 443;

#define DHTPIN 13 
#define sda 14
#define scl 15

#define DHTTYPE DHT11 

DHT dht(DHTPIN, DHTTYPE);
BH1750 lightMeter;

WiFiClientSecure client;

// CAMERA_MODEL_AI_THINKER
#define PWDN_GPIO_NUM     32
#define RESET_GPIO_NUM    -1
#define XCLK_GPIO_NUM      0
#define SIOD_GPIO_NUM     26
#define SIOC_GPIO_NUM     27

#define Y9_GPIO_NUM       35
#define Y8_GPIO_NUM       34
#define Y7_GPIO_NUM       39
#define Y6_GPIO_NUM       36
#define Y5_GPIO_NUM       21
#define Y4_GPIO_NUM       19
#define Y3_GPIO_NUM       18
#define Y2_GPIO_NUM        5
#define VSYNC_GPIO_NUM    25
#define HREF_GPIO_NUM     23
#define PCLK_GPIO_NUM     22

boolean statusPhoto=true;

int Status;

void setup() {
  
  WRITE_PERI_REG(RTC_CNTL_BROWN_OUT_REG, 0); 
  
  delay(1000);
  Serial.begin(115200);
  WiFi.mode(WIFI_OFF);  
  delay(1000);
  WiFi.mode(WIFI_STA);
  
  WiFi.begin(ssid, password);
  Serial.println("");

  Serial.print("Connecting");
  // Wait for connection
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }

  Serial.println("");
  Serial.print("Connected to ");
  Serial.println(ssid);
  Serial.print("IP address: ");
  Serial.println(WiFi.localIP()); 

  Wire.begin(sda, scl);
  lightMeter.begin();
  
  dht.begin();  

  camera_config_t config;
  config.ledc_channel = LEDC_CHANNEL_0;
  config.ledc_timer = LEDC_TIMER_0;
  config.pin_d0 = Y2_GPIO_NUM;
  config.pin_d1 = Y3_GPIO_NUM;
  config.pin_d2 = Y4_GPIO_NUM;
  config.pin_d3 = Y5_GPIO_NUM;
  config.pin_d4 = Y6_GPIO_NUM;
  config.pin_d5 = Y7_GPIO_NUM;
  config.pin_d6 = Y8_GPIO_NUM;
  config.pin_d7 = Y9_GPIO_NUM;
  config.pin_xclk = XCLK_GPIO_NUM;
  config.pin_pclk = PCLK_GPIO_NUM;
  config.pin_vsync = VSYNC_GPIO_NUM;
  config.pin_href = HREF_GPIO_NUM;
  config.pin_sscb_sda = SIOD_GPIO_NUM;
  config.pin_sscb_scl = SIOC_GPIO_NUM;
  config.pin_pwdn = PWDN_GPIO_NUM;
  config.pin_reset = RESET_GPIO_NUM;
  config.xclk_freq_hz = 20000000;
  config.pixel_format = PIXFORMAT_JPEG;

  // init with high specs to pre-allocate larger buffers
  if(psramFound()){
    config.frame_size = FRAMESIZE_SVGA;
    config.jpeg_quality = 10;  //0-63 lower number means higher quality
    config.fb_count = 2;
  } else {
    config.frame_size = FRAMESIZE_CIF;
    config.jpeg_quality = 12;  //0-63 lower number means higher quality
    config.fb_count = 1;
  }
  
  // camera init
  esp_err_t err = esp_camera_init(&config);
  if (err != ESP_OK) {
    Serial.printf("Camera init failed with error 0x%x", err);
    delay(1000);
    ESP.restart();
  }  
}

boolean Type=0;


int tempt;
int temph;
void loop() {
 

  String getData, Link;

  float h = dht.readHumidity();
  float t = dht.readTemperature();

  float lux = lightMeter.readLightLevel();
  
  Serial.print("Light: ");
  Serial.print(lux);
  Serial.println(" lx");
  
  if (isnan(h) || isnan(t)) {
    //Serial.println(F("Failed to read from DHT sensor!"));
    //return;
    t=tempt;
    h=temph;
  }else{
    tempt=t;
    temph=h;
  }


  Serial.print(F("Humidity: "));
  Serial.print(h);
  Serial.print(F("%  Temperature: "));
  Serial.print(t);
  Serial.println(F("°C "));
  delay(2000);

  HTTPClient http; 

  Type=!Type;
  getData = "?data1='" + String(t) + "'&data2='" + String(h) + "'&data3='" + String(lux) + "'&data4=" + String(Type);
  Link = "http://lab-android.com/uploads/plantiot.php" + getData;
  
  http.begin(Link); 
  
  int httpCode = http.GET();
  String payload = http.getString();
  if(httpCode==200){   
  Status=payload.toInt();
  if(Type){
    if(Status){
      Serial.println("manual"); 
      sendPhoto();  
    }
  }else{
   if(Status){
      Serial.println("auto"); 
      sendPhoto1();  
    }    
  }
  }

  //http.end(); 



}
String sendPhoto() {
  String getAll;
  String getBody;

  camera_fb_t * fb = NULL;
  fb = esp_camera_fb_get();
  if(!fb) {
    Serial.println("Camera capture failed");
    delay(1000);
    ESP.restart();
  }
  
  Serial.println("Connecting to server: " + serverName);
  
  client.setInsecure(); //skip certificate validation
  if (client.connect(serverName.c_str(), serverPort)) {
    Serial.println("Connection successful!");    
    String head = "--RandomNerdTutorials\r\nContent-Disposition: form-data; name=\"imageFile\"; filename=\"esp32-cam.jpg\"\r\nContent-Type: image/jpeg\r\n\r\n";
    String tail = "\r\n--RandomNerdTutorials--\r\n";

    uint32_t imageLen = fb->len;
    uint32_t extraLen = head.length() + tail.length();
    uint32_t totalLen = imageLen + extraLen;
  
    client.println("POST " + serverPath + " HTTP/1.1");
    client.println("Host: " + serverName);
    client.println("Content-Length: " + String(totalLen));
    client.println("Content-Type: multipart/form-data; boundary=RandomNerdTutorials");
    client.println();
    client.print(head);
  
    uint8_t *fbBuf = fb->buf;
    size_t fbLen = fb->len;
    for (size_t n=0; n<fbLen; n=n+1024) {
      if (n+1024 < fbLen) {
        client.write(fbBuf, 1024);
        fbBuf += 1024;
      }
      else if (fbLen%1024>0) {
        size_t remainder = fbLen%1024;
        client.write(fbBuf, remainder);
      }
    }   
    client.print(tail);
    
    esp_camera_fb_return(fb);
    
    int timoutTimer = 10000;
    long startTimer = millis();
    boolean state = false;
    
    while ((startTimer + timoutTimer) > millis()) {
      Serial.print(".");
      delay(100);      
      while (client.available()) {
        char c = client.read();
        if (c == '\n') {
          if (getAll.length()==0) { state=true; }
          getAll = "";
        }
        else if (c != '\r') { getAll += String(c); }
        if (state==true) { getBody += String(c); }
        startTimer = millis();
      }
      if (getBody.length()>0) { break; }
    }
    Serial.println();
    client.stop();
    Serial.println(getBody);
  }
  else {
    getBody = "Connection to " + serverName +  " failed.";
    Serial.println(getBody);
  }
  return getBody;
}
String sendPhoto1() {
  String getAll;
  String getBody;

  camera_fb_t * fb = NULL;
  fb = esp_camera_fb_get();
  if(!fb) {
    Serial.println("Camera capture failed");
    delay(1000);
    ESP.restart();
  }
  
  Serial.println("Connecting to server: " + serverName);
  
  client.setInsecure(); //skip certificate validation
  if (client.connect(serverName.c_str(), serverPort)) {
    Serial.println("Connection successful!");    
    String head = "--RandomNerdTutorials\r\nContent-Disposition: form-data; name=\"imageFile\"; filename=\"esp32-cam.jpg\"\r\nContent-Type: image/jpeg\r\n\r\n";
    String tail = "\r\n--RandomNerdTutorials--\r\n";

    uint32_t imageLen = fb->len;
    uint32_t extraLen = head.length() + tail.length();
    uint32_t totalLen = imageLen + extraLen;
  
    client.println("POST " + serverPath1 + " HTTP/1.1");
    client.println("Host: " + serverName);
    client.println("Content-Length: " + String(totalLen));
    client.println("Content-Type: multipart/form-data; boundary=RandomNerdTutorials");
    client.println();
    client.print(head);
  
    uint8_t *fbBuf = fb->buf;
    size_t fbLen = fb->len;
    for (size_t n=0; n<fbLen; n=n+1024) {
      if (n+1024 < fbLen) {
        client.write(fbBuf, 1024);
        fbBuf += 1024;
      }
      else if (fbLen%1024>0) {
        size_t remainder = fbLen%1024;
        client.write(fbBuf, remainder);
      }
    }   
    client.print(tail);
    
    esp_camera_fb_return(fb);
    
    int timoutTimer = 10000;
    long startTimer = millis();
    boolean state = false;
    
    while ((startTimer + timoutTimer) > millis()) {
      Serial.print(".");
      delay(100);      
      while (client.available()) {
        char c = client.read();
        if (c == '\n') {
          if (getAll.length()==0) { state=true; }
          getAll = "";
        }
        else if (c != '\r') { getAll += String(c); }
        if (state==true) { getBody += String(c); }
        startTimer = millis();
      }
      if (getBody.length()>0) { break; }
    }
    Serial.println();
    client.stop();
    Serial.println(getBody);
  }
  else {
    getBody = "Connection to " + serverName +  " failed.";
    Serial.println(getBody);
  }
  return getBody;
}